HPOPs probably last a few hundred thousand and cost a couple grand to replace. The bottom end should go 500k to a million miles, and given how long they last, used ones are kind of cheap if you need one.

How long will a bullet proof 6.0 last?

But they will give you a solid 50,000-80,000 miles, especially with proper fluid changes. A Ford oil cooler is ~$300 and labor at 10 hours is ~$800. Needless to say, you can do a lot of Ford oil cooler changes for one Bulletproof oil cooler. Odds are you won't own the truck long enough to worry about the next cooler.

What does it mean when a 6.0 is bullet proofed?

The fine folks at BulletProof Diesel define 6.0L Power Stroke as being "bulletproofed" when it has at least four of the five main problem areas addressed. These five areas are: Oil cooler, EGR cooler, head studs, fuel injection control module (FICM), and water pump.

Does a 6.0 need to be bulletproofed?

Learn more here. Again, a 6.0L is not a "Bullet Proof Diesel" engine unless four of the five pattern failures are addressed with genuine Bullet Proof Diesel parts. This includes the problematic OEM oil cooler as well as the FICM module, EGR cooler and water pump.

How reliable is a 6.0 Powerstroke?

Other 6.0L Powerstroke problems include HPOP failure, injector stiction, FICM failure, and clogging oil coolers. Fortunately, once these problems are addressed, the trucks are much more reliable. Some of these problems can be avoided.

What powerstroke to avoid?

What Years Are Ford Diesel Engines To Avoid? This Ford Super Duty six came out between 2003 and 2007. As far as diesel trucks go, 0L can be said to be the most horrendous. Powerstrokes with 0L capacity are notorious.

What year did Ford 6.0 diesel have problems?

If you drive a 2003 to 2007 Ford Superduty Diesel truck with the 6.0L Powerstroke engine, we hate to say it here at Moose Jaw Truck Shop but you've probably had some problems with it.

How many miles will a 6.0 diesel last?

The bottom end should go 500k to a million miles, and given how long they last, used ones are kind of cheap if you need one. I've read about high mileage 6.0s that still have nice cylinder bores.

How much HP can a stock 6.0 Powerstroke handle?

Even a decade ago, before PCM tuning was anywhere near as refined as it is now, several 6.0L owners proved the 6.0L's bottom end could withstand 700-rwhp. Today, a lot of serious enthusiasts conclude that the 800 hp 6.0 Power Stroke range gets you into unchartered waters with a 6.0L.

How much is a bulletproof 6.0 worth?

Install can run about $700-1,000 so the upgrade can cost upwards or beyond $3,000 all in. Compare that to a factory Ford 6.0 Power Stroke oil cooler for about $300. Add in labor and you can still replace the factory oil cooler about 3x before the bulletproof 6.0L oil cooler upgrade is worth the cost.

How much does it cost to bulletproof a car?

Unfortunately, bulletproofing a car will usually cost between $16,000 and $50,000 but can sometimes cost even more. The price is largely based on the size of your car and the areas you'd like bulletproofed. Remember, each panel of bulletproof material costs between $500 and $1,500—and that's not even counting labor.

What is the best year for Powerstroke diesel?

In terms of Ford Super Duty trucks, models 2012 and any models since 2013 or newer, as well as 2017 models, have the best value, but 2017 versions had a couple of problems… In light of the 2008-10, 2009, 2010, and 2011 Ford Super Duty trucks, you will need to stay out of them.

How many miles will a 6.7 Powerstroke last?

In addition to Duramax and Cummins engines, Powerstroke engines are found in Ford trucks. They can generally last 500,000 miles per year. In general, Powerstroke engines are classified as having between 350,000 and 500,000 miles of warranty.

How long do 6.0 injectors last?

With proper care and maintenance of the engine, you can expect a diesel injector to last between 200,000 and 300,000 kilometres.

What is the life expectancy of a 6.7 Powerstroke?

In fact, dynamometer testing has revealed a statistically-proven lifespan of 500,000 miles or more; that's the estimated service span before 10 percent of engines might need significant work requiring the removal of the cylinder heads or oil pan.

How much HP does a tuned 6.0 Powerstroke have?

'03-07 6.0L Power Stroke

Our own testing of custom 6.0L tuning yielded 415-420 hp on the rollers—right smack-dab in the middle of what most folks see. By comparison, off-the-shelf universal tunes typically lay down somewhere between 360 and 380 hp.

What is a 7.3 Powerstroke?

The 7.3L Powerstroke is one of the most reliable Diesel engines ever produced. It's so reliable even die-hard Cummins and Duramax enthusiasts acknowledge it's widespread success. This makes them one of the most sought after diesels today.

How long will a Cummins diesel engine last?

Cummins diesel engines can last a long time, as with Duramax engines. Cummins diesel engines typically have a range of 350,000 to 500,000 miles.

Is 6.0 or 7.3 Powerstroke better?

From a reliability, durability or simplicity standpoint, the 7.3L is hands down the winner. When it comes to horsepower, drivability and meeting modern day emissions standards, the 6.0L has it beat. Ultimately, both engines have their pros and cons.

Is the 6.0 diesel a good engine?

The 6.0L is a good engine when it is running properly. It has one main failure that is commonly overlooked and is the cause of most of the big issues this engine has. The oil is the life blood of the 6.0L diesel as the injectors are hydraulically actuated using engine oil to drive them.

What was the best year of the 6.0 Powerstroke?

05-07 are considered the better years for the 6.0. There's really no reason to look at anything older than 05 unless you really want a 7.3 or the price is amazing.

What years are Ford diesel engines to avoid?

Ford SuperDuty Diesel Truck Problems: Fixing Them From 2003-2007. In my experience, most diesel lovers avoid buying the 2003 to 2007 model-year Ford Superduty diesel trucks. The 6. Powerstroke 0L produces problematic power when used in large quantities.

How much does it cost to replace a 6.0 diesel engine?

On average, the cost of a 6.0 powerstroke diesel engine rebuild is going to be around $7,500. Or, if you choose to get this engine rebuilt from a parts kit, a parts kit will cost you about $2,165 on average.